PHP-Envoyer des Mails en local avec MAMP Pro& Yosemite

J'ai pas mal galérer également et au final, n'ayant pas réussi, je suis passer par PhpMailler qui va très bien ;)

Ca marche bien avec Yosemite ?

Totalement indépendant de l'OS ;) C'est une lib PHP.
Suffit de mettre son mail et mdp d'une boite existante (gmail fait bien l'affaire) et c'est parti

merci et il faut configurer un postfix sur mamp pro ?

J'ai bien essayé de conf postfix etc... pas moyen ;) Mais avec PHPMailer tu n'as rien à configurer ;)

OK Merci je vais tester ca :)

Tu pourrais me diriger vers un TUto ou me copier/ coller du code justement pour suivre les instructions et pour tester ? Merci :)

Bonjour.

Tu pourrais me diriger vers un TUto ou me copier/ coller du code justement pour suivre les instructions et pour tester ? Merci :)

Pourquoi demander ça, alors que :

Mais avec PHPMailer tu n'as rien à configurer ;)

Tout est expliqué sur le github de phpmailer, il y a même des fichiers d'exemples il me semble.
https://github.com/PHPMailer/PHPMailer

ça ne marche toujours pas :(

tu peux nous montrer ton code ? (n'oublie pas de cacher le mdp ^^)

<?php
/**

• This example shows settings to use when sending via Google's Gmail servers.
  */

//SMTP needs accurate times, and the PHP time zone MUST be set
//This should be done in your php.ini, but this is how to do it if you don't have access to that
date_default_timezone_set('Etc/UTC');

require '../PHPMailerAutoload.php';

//Create a new PHPMailer instance
$mail = new PHPMailer;

//Tell PHPMailer to use SMTP
$mail->isSMTP();

//Enable SMTP debugging
// 0 = off (for production use)
// 1 = client messages
// 2 = client and server messages
$mail->SMTPDebug = 2;

//Ask for HTML-friendly debug output
$mail->Debugoutput = 'html';

//Set the hostname of the mail server
$mail->Host = 'smtp.gmail.com';
// use
// $mail->Host = gethostbyname('smtp.gmail.com');
// if your network does not support SMTP over IPv6

//Set the SMTP port number - 587 for authenticated TLS, a.k.a. RFC4409 SMTP submission
$mail->Port = 587;

//Set the encryption system to use - ssl (deprecated) or tls
$mail->SMTPSecure = 'tls';

//Whether to use SMTP authentication
$mail->SMTPAuth = true;

//Username to use for SMTP authentication - use full email address for gmail
$mail->Username = "mica.aidan@gmail.com";

//Password to use for SMTP authentication
$mail->Password = "***";

//Set who the message is to be sent from
$mail->setFrom('mica.aidan@gmail.com', 'First Last');

//Set an alternative reply-to address
$mail->addReplyTo('mica.aidan@gmail.com', 'First Last');

//Set who the message is to be sent to
$mail->addAddress('mica.aidan@gmail.com', 'John Doe');

//Set the subject line
$mail->Subject = 'PHPMailer GMail SMTP test';

//Read an HTML message body from an external file, convert referenced images to embedded,
//convert HTML into a basic plain-text alternative body
$mail->msgHTML(file_get_contents('contents.html'), dirname(FILE));

//Replace the plain text body with one created manually
$mail->AltBody = 'This is a plain-text message body';

//Attach an image file
$mail->addAttachment('images/phpmailer_mini.png');

//send the message, check for errors
if (!$mail->send()) {
echo "Mailer Error: " . $mail->ErrorInfo;
} else {
echo "Message sent!";
}?>

Je vous mets aussi mon code de fichier Postfix. Peut etre que j'ai loupé un truc

Merci beaucoup

Global Postfix configuration file. This file lists only a subset of all 300+ parameters. See the postconf(5) manual page for a complete list.

#

The general format of each line is: parameter = value. Lines that begin with whitespace continue the previous line. A value can contain references to other $names or ${name}s.

#

NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF POSTFIX STILL WORKS AFTER EVERY CHANGE. SOFT BOUNCE

#

The soft_bounce parameter provides a limited safety net for testing. When soft_bounce is enabled, mail will remain queued that would otherwise bounce. This parameter disables locally-generated bounces, and prevents the SMTP server from rejecting mail permanently (by changing 5xx replies into 4xx replies). However, soft_bounce is no cure for address rewriting mistakes or mail routing mistakes.

#

soft_bounce = no LOCAL PATHNAME INFORMATION

#

The queue_directory specifies the location of the Postfix queue. This is also the root directory of Postfix daemons that run chrooted. See the files in examples/chroot-setup for setting up Postfix chroot environments on different UNIX systems.

#
queue_directory = /private/var/spool/postfix

The command_directory parameter specifies the location of all postXXX commands.

#
command_directory = /usr/sbin

The daemon_directory parameter specifies the location of all Postfix daemon programs (i.e. programs listed in the master.cf file). This directory must be owned by root.

#
daemon_directory = /usr/libexec/postfix

QUEUE AND PROCESS OWNERSHIP

#

The mail_owner parameter specifies the owner of the Postfix queue and of most Postfix daemon processes. Specify the name of a user account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In particular, don't specify nobody or daemon. PLEASE USE A DEDICATED USER.

#
mail_owner = _postfix

The default_privs parameter specifies the default rights used by the local delivery agent for delivery to external file or command. These rights are used in the absence of a recipient user context. DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.

#

default_privs = nobody INTERNET HOST AND DOMAIN NAMES

#

The myhostname parameter specifies the internet hostname of this mail system. The default is to use the fully-qualified domain name from gethostname(). $myhostname is used as a default value for many other configuration parameters.

#

myhostname = host.domain.tld myhostname = virtual.domain.tld The mydomain parameter specifies the local internet domain name. The default is to use $myhostname minus the first component. $mydomain is used as a default value for many other configuration parameters.

#

mydomain = domain.tld SENDING MAIL

#

The myorigin parameter specifies the domain that locally-posted mail appears to come from. The default is to append $myhostname, which is fine for small sites. If you run a domain with multiple machines, you should (1) change this to $mydomain and (2) set up a domain-wide alias database that aliases each user to user@that.users.mailhost.

#

For the sake of consistency between sender and recipient addresses, myorigin also specifies the default domain name that is appended to recipient addresses that have no @domain part.

#

myorigin = $myhostname myorigin = $mydomain RECEIVING MAIL The inet_interfaces parameter specifies the network interface addresses that this mail system receives mail on. By default, the software claims all active interfaces on the machine. The parameter also controls delivery of mail to user@[ip.address].

#

See also the proxy_interfaces parameter, for network addresses that are forwarded to us via a proxy or network address translator.

#

Note: you need to stop/start Postfix when this parameter changes.

#

inet_interfaces = all inet_interfaces = $myhostname inet_interfaces = $myhostname, localhost The proxy_interfaces parameter specifies the network interface addresses that this mail system receives mail on by way of a proxy or network address translation unit. This setting extends the address list specified with the inet_interfaces parameter.

#

You must specify your proxy/NAT addresses when your system is a backup MX host for other domains, otherwise mail delivery loops will happen when the primary MX host is down.

#

proxy_interfaces = proxy_interfaces = 1.2.3.4 The mydestination parameter specifies the list of domains that this machine considers itself the final destination for.

#

These domains are routed to the delivery agent specified with the local_transport parameter setting. By default, that is the UNIX compatible delivery agent that lookups all recipients in /etc/passwd and /etc/aliases or their equivalent.

#

The default is $myhostname + localhost.$mydomain. On a mail domain gateway, you should also include $mydomain.

#

Do not specify the names of virtual domains - those domains are specified elsewhere (see VIRTUAL_README).

#

Do not specify the names of domains that this machine is backup MX host for. Specify those names via the relay_domains settings for the SMTP server, or use permit_mx_backup if you are lazy (see STANDARD_CONFIGURATION_README).

#

The local machine is always the final destination for mail addressed to user@[the.net.work.address] of an interface that the mail system receives mail on (see the inet_interfaces parameter).

#

Specify a list of host or domain names, /file/name or type:table patterns, separated by commas and/or whitespace. A /file/name pattern is replaced by its contents; a type:table is matched when a name matches a lookup key (the right-hand side is ignored). Continue long lines by starting the next line with whitespace.

#

See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".

#

mydestination = $myhostname, localhost.$mydomain, localhost mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, mail.$mydomain, www.$mydomain, ftp.$mydomain REJECTING MAIL FOR UNKNOWN LOCAL USERS

#

The local_recipient_maps parameter specifies optional lookup tables with all names or addresses of users that are local with respect to $mydestination, $inet_interfaces or $proxy_interfaces.

#

If this parameter is defined, then the SMTP server will reject mail for unknown local users. This parameter is defined by default.

#

To turn off local recipient checking in the SMTP server, specify local_recipient_maps = (i.e. empty).

#

The default setting assumes that you use the default Postfix local delivery agent for local delivery. You need to update the local_recipient_maps setting if:

#

- You define $mydestination domain recipients in files other than /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. For example, you define $mydestination domain recipients in the $virtual_mailbox_maps files.

#

- You redefine the local delivery agent in master.cf.

#

- You redefine the "local_transport" setting in main.cf.

#

- You use the "luser_relay", "mailbox_transport", or "fallback_transport" feature of the Postfix local delivery agent (see local(8)).

#

Details are described in the LOCAL_RECIPIENT_README file.

#

Beware: if the Postfix SMTP server runs chrooted, you probably have to access the passwd file via the proxymap service, in order to overcome chroot restrictions. The alternative, having a copy of the system passwd file in the chroot jail is just not practical.

#

The right-hand side of the lookup tables is conveniently ignored. In the left-hand side, specify a bare username, an @domain.tld wild-card, or specify a user@domain.tld address.

#

local_recipient_maps = unix:passwd.byname $alias_maps local_recipient_maps = proxy:unix:passwd.byname $alias_maps local_recipient_maps = The unknown_local_recipient_reject_code specifies the SMTP server response code when a recipient domain matches $mydestination or ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty and the recipient address or address local-part is not found.

#

The default setting is 550 (reject mail) but it is safer to start with 450 (try again later) until you are certain that your local_recipient_maps settings are OK.

#
unknown_local_recipient_reject_code = 550

TRUST AND RELAY CONTROL The mynetworks parameter specifies the list of "trusted" SMTP clients that have more privileges than "strangers".

#

In particular, "trusted" SMTP clients are allowed to relay mail through Postfix. See the smtpd_recipient_restrictions parameter in postconf(5).

#

You can specify the list of "trusted" network addresses by hand or you can let Postfix do it for you (which is the default).

#

By default (mynetworks_style = subnet), Postfix "trusts" SMTP clients in the same IP subnetworks as the local machine. On Linux, this does works correctly only with interfaces specified with the "ifconfig" command.

#

Specify "mynetworks_style = class" when Postfix should "trust" SMTP clients in the same IP class A/B/C networks as the local machine. Don't do this with a dialup site - it would cause Postfix to "trust" your entire provider's network. Instead, specify an explicit mynetworks list by hand, as described below. Specify "mynetworks_style = host" when Postfix should "trust" only the local machine.

#

mynetworks_style = class mynetworks_style = subnet mynetworks_style = host Alternatively, you can specify the mynetworks list by hand, in which case Postfix ignores the mynetworks_style setting.

#

Specify an explicit list of network/netmask patterns, where the mask specifies the number of bits in the network part of a host address.

#

You can also specify the absolute pathname of a pattern file instead of listing the patterns here. Specify type:table for table-based lookups (the value on the table right-hand side is not used). mynetworks = 168.100.189.0/28, 127.0.0.0/8 mynetworks = $config_directory/mynetworks mynetworks = hash:/etc/postfix/network_table The relay_domains parameter restricts what destinations this system will relay mail to. See the smtpd_recipient_restrictions description in postconf(5) for detailed information.

#

By default, Postfix relays mail - from "trusted" clients (IP address matches $mynetworks) to any destination, - from "untrusted" clients to destinations that match $relay_domains or subdomains thereof, except addresses with sender-specified routing. The default relay_domains value is $mydestination.

#

In addition to the above, the Postfix SMTP server by default accepts mail that Postfix is final destination for: - destinations that match $inet_interfaces or $proxy_interfaces, - destinations that match $mydestination - destinations that match $virtual_alias_domains, - destinations that match $virtual_mailbox_domains. These destinations do not need to be listed in $relay_domains.

#

Specify a list of hosts or domains, /file/name patterns or type:name lookup tables, separated by commas and/or whitespace. Continue long lines by starting the next line with whitespace. A file name is replaced by its contents; a type:name table is matched when a (parent) domain appears as lookup key.

#

NOTE: Postfix will not automatically forward mail for domains that list this system as their primary or backup MX host. See the permit_mx_backup restriction description in postconf(5).

#

relay_domains = $mydestination INTERNET OR INTRANET The relayhost parameter specifies the default host to send mail to when no entry is matched in the optional transport(5) table. When no relayhost is given, mail is routed directly to the destination.

#

On an intranet, specify the organizational domain name. If your internal DNS uses no MX records, specify the name of the intranet gateway host instead.

#

In the case of SMTP, specify a domain, host, host:port, [host]:port, [address] or [address]:port; the form [host] turns off MX lookups.

#

If you're connected via UUCP, see also the default_transport parameter.

#

relayhost = $mydomain relayhost = [gateway.my.domain] relayhost = [mailserver.isp.tld] relayhost = uucphost relayhost = [an.ip.add.ress] REJECTING UNKNOWN RELAY USERS

#

The relay_recipient_maps parameter specifies optional lookup tables with all addresses in the domains that match $relay_domains.

#

If this parameter is defined, then the SMTP server will reject mail for unknown relay users. This feature is off by default.

#

The right-hand side of the lookup tables is conveniently ignored. In the left-hand side, specify an @domain.tld wild-card, or specify a user@domain.tld address.

#

relay_recipient_maps = hash:/etc/postfix/relay_recipients INPUT RATE CONTROL

#

The in_flow_delay configuration parameter implements mail input flow control. This feature is turned on by default, although it still needs further development (it's disabled on SCO UNIX due to an SCO bug).

#

A Postfix process will pause for $in_flow_delay seconds before accepting a new message, when the message arrival rate exceeds the message delivery rate. With the default 100 SMTP server process limit, this limits the mail inflow to 100 messages a second more than the number of messages delivered per second.

#
#

Specify 0 to disable the feature. Valid delays are 0..10.

#

in_flow_delay = 1s ADDRESS REWRITING

#

The ADDRESS_REWRITING_README document gives information about address masquerading or other forms of address rewriting including username->Firstname.Lastname mapping. ADDRESS REDIRECTION (VIRTUAL DOMAIN)

#

The VIRTUAL_README document gives information about the many forms of domain hosting that Postfix supports. "USER HAS MOVED" BOUNCE MESSAGES

#

See the discussion in the ADDRESS_REWRITING_README document. username->Firstname.Lastname mapping. ADDRESS REDIRECTION (VIRTUAL DOMAIN)

#

The VIRTUAL_README document gives information about the many forms of domain hosting that Postfix supports. "USER HAS MOVED" BOUNCE MESSAGES

#

See the discussion in the ADDRESS_REWRITING_README document. TRANSPORT MAP

#

See the discussion in the ADDRESS_REWRITING_README document. ALIAS DATABASE

#

The alias_maps parameter specifies the list of alias databases used by the local delivery agent. The default list is system dependent.

#

On systems with NIS, the default is to search the local alias database, then the NIS alias database. See aliases(5) for syntax details.

#

If you change the alias database, run "postalias /etc/aliases" (or wherever your system stores the mail alias file), or simply run "newaliases" to build the necessary DBM or DB file.

#
#

It will take a minute or so before changes become visible. Use "postfix reload" to eliminate the delay.

#

alias_maps = dbm:/etc/aliases alias_maps = hash:/etc/aliases alias_maps = hash:/etc/aliases, nis:mail.aliases alias_maps = netinfo:/aliases The alias_database parameter specifies the alias database(s) that are built with "newaliases" or "sendmail -bi". This is a separate configuration parameter, because alias_maps (see above) may specify tables that are not necessarily all under control by Postfix.

#

alias_database = dbm:/etc/aliases alias_database = dbm:/etc/mail/aliases alias_database = hash:/etc/aliases alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases ADDRESS EXTENSIONS (e.g., user+foo)

#

The recipient_delimiter parameter specifies the separator between user names and address extensions (user+foo). See canonical(5), local(8), relocated(5) and virtual(5) for the effects this has on aliases, canonical, virtual, relocated and .forward file lookups. Basically, the software tries user+foo and .forward+foo before trying user and .forward.

#

recipient_delimiter = + DELIVERY TO MAILBOX

#

The home_mailbox parameter specifies the optional pathname of a mailbox file relative to a user's home directory. The default mailbox file is /var/spool/mail/user or /var/mail/user. Specify "Maildir/" for qmail-style delivery (the / is required).

#

home_mailbox = Mailbox home_mailbox = Maildir/ The mail_spool_directory parameter specifies the directory where UNIX-style mailboxes are kept. The default setting depends on the system type.

#

mail_spool_directory = /var/mail mail_spool_directory = /var/spool/mail The mailbox_command parameter specifies the optional external command to use instead of mailbox delivery. The command is run as the recipient with proper HOME, SHELL and LOGNAME environment settings. Exception: delivery for root is done as $default_user.

#

Other environment variables of interest: USER (recipient username), EXTENSION (address extension), DOMAIN (domain part of address), and LOCAL (the address localpart).

#

Unlike other Postfix configuration parameters, the mailbox_command parameter is not subjected to $parameter substitutions. This is to make it easier to specify shell syntax (see example below).

#

Avoid shell meta characters because they will force Postfix to run an expensive shell process. Procmail alone is expensive enough.

#

IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.

#

mailbox_command = /some/where/procmail mailbox_command = /some/where/procmail -a "$EXTENSION" The mailbox_transport specifies the optional transport in master.cf to use after processing aliases and .forward files. This parameter has precedence over the mailbox_command, fallback_transport and luser_relay parameters.

#

Specify a string of the form transport:nexthop, where transport is the name of a mail delivery transport defined in master.cf. The :nexthop part is optional. For more details see the sample transport configuration file.

#

NOTE: if you use this feature for accounts not in the UNIX password file, then you must update the "local_recipient_maps" setting in the main.cf file, otherwise the SMTP server will reject mail for non-UNIX accounts with "User unknown in local recipient table".

#

fallback_transport = lmtp:unix:/file/name fallback_transport = cyrus fallback_transport = The luser_relay parameter specifies an optional destination address for unknown recipients. By default, mail for unknown@$mydestination, unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned as undeliverable.

#

The following expansions are done on luser_relay: $user (recipient username), $shell (recipient shell), $home (recipient home directory), $recipient (full recipient address), $extension (recipient address extension), $domain (recipient domain), $local (entire recipient localpart), $recipient_delimiter. Specify ${name?value} or ${name:value} to expand value only when $name does (does not) exist.

#

luser_relay works only for the default Postfix local delivery agent.

#

NOTE: if you use this feature for accounts not in the UNIX password file, then you must specify "local_recipient_maps =" (i.e. empty) in the main.cf file, otherwise the SMTP server will reject mail for non-UNIX accounts with "User unknown in local recipient table".

#

luser_relay = $user@other.host luser_relay = $local@other.host luser_relay = admin+$local JUNK MAIL CONTROLS

#

The controls listed here are only a very small subset. The file SMTPD_ACCESS_README provides an overview. The header_checks parameter specifies an optional table with patterns that each logical message header is matched against, including headers that span multiple physical lines.

#

By default, these patterns also apply to MIME headers and to the headers of attached messages. With older Postfix versions, MIME and attached message headers were treated as body text.

#

For details, see "man header_checks".

#

header_checks = regexp:/etc/postfix/header_checks FAST ETRN SERVICE

#

Postfix maintains per-destination logfiles with information about deferred mail, so that mail can be flushed quickly with the SMTP "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". See the ETRN_README document for a detailed description.

#

The fast_flush_domains parameter controls what destinations are eligible for this service. By default, they are all domains that this server is willing to relay mail to.

#

fast_flush_domains = $relay_domains SHOW SOFTWARE VERSION OR NOT

#

The smtpd_banner parameter specifies the text that follows the 220 code in the SMTP server's greeting banner. Some people like to see the mail version advertised. By default, Postfix shows no version.

#

You MUST specify $myhostname at the start of the text. That is an RFC requirement. Postfix itself does not care.

#

smtpd_banner = $myhostname ESMTP $mail_name smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) PARALLEL DELIVERY TO THE SAME DESTINATION

#

How many parallel deliveries to the same user or domain? With local delivery, it does not make sense to do massively parallel delivery to the same user, because mailbox updates must happen sequentially, and expensive pipelines in .forward files can cause disasters when too many are run at the same time. With SMTP deliveries, 10 simultaneous connections to the same domain could be sufficient to raise eyebrows. Each message delivery transport has its XXX_destination_concurrency_limit parameter. The default is $default_destination_concurrency_limit for most delivery transports. For the local delivery agent the default is 2. local_destination_concurrency_limit = 2 default_destination_concurrency_limit = 20 DEBUGGING CONTROL

#

The debug_peer_level parameter specifies the increment in verbose logging level when an SMTP client or server host name or address matches a pattern in the debug_peer_list parameter.

#
debug_peer_level = 2

The debug_peer_list parameter specifies an optional list of domain or network patterns, /file/name patterns or type:name tables. When an SMTP client or server host name or address matches a pattern, increase the verbose logging level by the amount specified in the debug_peer_level parameter.

#

debug_peer_list = 127.0.0.1 debug_peer_list = some.domain The debugger_command specifies the external command that is executed when a Postfix daemon program is run with the -D option.

#

Use "command .. & sleep 5" so that the debugger can attach before the process marches on. If you use an X-based debugger, be sure to set up your XAUTHORITY environment variable before starting Postfix.

#
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5

If you don't have X installed on the Postfix machine, try: debugger_command = PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 >$config_directory/$process_name.$process_id.log & sleep 5 INSTALL-TIME CONFIGURATION INFORMATION

#

The following parameters are used when installing a new Postfix version.

#

sendmail_path: The full pathname of the Postfix sendmail command. This is the Sendmail-compatible mail posting interface.

#
sendmail_path = /usr/sbin/sendmail

newaliases_path: The full pathname of the Postfix newaliases command. This is the Sendmail-compatible command to build alias databases.

#
newaliases_path = /usr/bin/newaliases

mailq_path: The full pathname of the Postfix mailq command. This is the Sendmail-compatible mail queue listing command.

#
mailq_path = /usr/bin/mailq

setgid_group: The group for mail submission and queue management commands. This must be a group name with a numerical group ID that is not shared with other accounts, not even with the Postfix account.

#
#
setgid_group = _postdrop

html_directory: The location of the Postfix HTML documentation.

#
html_directory = no

manpage_directory: The location of the Postfix on-line manual pages.

#
manpage_directory = /usr/share/man

sample_directory: The location of the Postfix sample configuration files. This parameter is obsolete as of Postfix 2.1.

#
sample_directory = /usr/share/doc/postfix/examples

readme_directory: The location of the Postfix README files.

#
readme_directory = /usr/share/doc/postfix
readme_directory = /usr/share/doc/postfix

THE FOLLOWING DEFAULTS ARE SET BY APPLE

#

bind to localhost only

#
inet_interfaces = localhost

turn off relaying for local subnet

#
mynetworks_style = host

mydomain_fallback: optional domain to use if mydomain is not set and myhostname is not fully qualified. It is ignored if neither are true.

#
mydomain_fallback = localhost

mailbox or maildir file (in fact, it limits the size of any file that is written to upon local delivery) The default is 50 MBytes. This limit must not be set smaller than the message size limit.

#
mailbox_size_limit = 0

smtpd_tls_key_file =

MAMP Postfix Configuration - Start

myorigin = gmail.com
myhostname = mailer.$myorigin
smtpd_sender_restrictions = permit_inet_interfaces

smart host

relayhost = [smtp.gmail.com]:587
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
smtp_sasl_security_options = noanonymous
smtp_tls_CAfile = /etc/postfix/cacert.pem
smtp_use_tls = yes

MAMP Postfix Configuration - End

DONT REMOVE: MAMP PRO main.cf template compatibility version: 1

Tu as un message d'erreur ?

Sans PHp Mailer: connexion failed apparu dans la console. Je n'ai pas activé le DNS est ce le pb ?
Et maintenant le mail log ne s'ouvre plus
A présent avec Php mailer , je n'ai rien, je vois juste mon titre du doc mais je ne reçois rien

Et le pire c'est que le terminal m'indique à chaque fois: "You have a mail "

Bonsoir,
Je remarque que tu utilises la même adresse pour l"émetteur et le destinataire
as-tu essayé avec un autre destinataire ?
Sinon ton postfix n'intervient pas puisque tu donnes smtp.gmail.com comme serveur

Non je n'ai pas essayé mais c'est fait exprès pour pouvoir tester apres des confirmation d'inscription de comptes en local

J'ai pu lire le message du terminal "you have a mail" Voici ce qu'ils me disent :
Message 1:
From MAILER-DAEMON Fri Aug 21 22:10:12 2015
X-Original-To: michaelaidan@pc24.home
Delivered-To: michaelaidan@pc24.home
Date: Fri, 21 Aug 2015 22:10:11 +0200 (CEST)
From: MAILER-DAEMON@pc24.home (Mail Delivery System)
Subject: Undelivered Mail Returned to Sender
To: michaelaidan@pc24.home
Auto-Submitted: auto-replied
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="C843F15F581B.1440187811/pc24.home"
Content-Transfer-Encoding: 8bit

This is a MIME-encapsulated message.

--C843F15F581B.1440187811/pc24.home
Content-Description: Notification
Content-Type: text/plain; charset=us-ascii

This is the mail system at host pc24.home.

I'm sorry to have to inform you that your message could not
:

tu as mis quoi pour le tsl ? il faut mettre une chaine vide avec gmail... le problème vient peut-être de là.

I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to postmaster.

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

               The mail system

mica.aidan@gmail.com: connect to
alt2.gmail-smtp-in.l.google.com[74.125.200.26]:25: Operation timed out

--C843F15F581B.1440187811/pc24.home
Content-Description: Delivery report
Content-Type: message/delivery-status

Reporting-MTA: dns; pc24.home
X-Postfix-Queue-ID: C843F15F581B
X-Postfix-Sender: rfc822; michaelaidan@pc24.home
Arrival-Date: Wed, 5 Aug 2015 13:01:08 +0200 (CEST)
Reporting-MTA: dns; pc24.home
X-Postfix-Queue-ID: C843F15F581B
X-Postfix-Sender: rfc822; michaelaidan@pc24.home
Arrival-Date: Wed, 5 Aug 2015 13:01:08 +0200 (CEST)

Final-Recipient: rfc822; mica.aidan@gmail.com
Action: failed
Status: 4.4.1
Diagnostic-Code: X-Postfix; connect to
alt2.gmail-smtp-in.l.google.com[74.125.200.26]:25: Operation timed out

--C843F15F581B.1440187811/pc24.home
Content-Description: Undelivered Message
Content-Type: message/rfc822
Content-Transfer-Encoding: 8bit
Return-Path: michaelaidan@pc24.home
Received: by pc24.home (Postfix, from userid 501)
id C843F15F581B; Wed, 5 Aug 2015 13:01:08 +0200 (CEST)
To: mica.aidan@gmail.com
Subject: CONTACT-Monsite.com !
MIME-Version: 1.0
From:"Expediteur.com"mica.aidan@gmail.com
Content-Type:text/html; charset="uft-8"
Content-Transfer-Encoding: 8bit
Message-Id: 20150805110108.C843F15F581B@pc24.home
Date: Wed, 5 Aug 2015 13:01:08 +0200 (CEST)
<html>
<body>
<div align="center">
<img src="http://www.primfx.com/mailing/banniere.png"/>
<br />
<u>Nom de l'expéditeur :</u>Aidan Michael<br/>
<u>Mail de l'expéditeur :/u>mica.aidan@gmail.com<br/
<br/>
Test 1
<br/>
<img src="http://www.primfx.com/mailing/separati:
</div>
</body>
</html>

--C843F15F581B.1440187811/pc24.home--

?

c'est quoi exactement le TSL ?

Voilà ;) https://support.google.com/a/answer/2520500?hl=fr

Je vois et il faut me créer un compte Pro alors que je n'ai pas encore réservé de nom de domaine. N'y a -t-il pas un autre moyen ?

D'après ce que j'ai envoyé surtout sur le main.cf, y a rien qui vous choque ? :) Peut etre que je suis passé a cote de qqchose
Merci de jeter votre coup d'oeil d'expert :)
Ca marche si on active autre chose que le tsl ?
Merci

$mail = new PHPMailer();
$mail->isSMTP();
$mail->Host ='smtp.gmail.com;
$mail->SMTPAuth = true;
$mail->Username = 'ton email';
$mail->Password = 'ton mdp';
$mail->SMTPSecure = '';
$mail->Port = 587;
$mail->Mailer->addAddress('email du destinataire');
$mail->Mailer->Subject = 'Le sujet';
$mail->Body = "Contenu du mail";
$mail->sen();

Normalment rien que ça ça fonctionne sans probleme ! Essaie ce petit bout de code déjà avec tes identifiants ton tu n'as plus qu'a remplcer le username, le password et le destinataire... Et normalement devrait y avoir de soucis.

Je vais essayer merci en tout cas attention petite erreur dernière ligne "send" ;)

Je viens d'essayer feuille blanche et aucun retour. J'ai lu dernièrement que le FAI et Gmail, ils sont pas très copains.
Je vais essayer avec une autre adresse mail de destination

Nada je viens de voir :(
Faut il quand meme créer du code HTML du genre apres un submit voir l'effet que ca fait ?

le port 587 c'est pour du starttls (la connexion démarre en texte clair puis bascule en tls si c'est possible, tout en gardant le même port)
mais je n'ai pas vu l'option 'starttls' dans phpMailer !!!
essaye de forcer tls en 465

je viens de voir que le STMP secure est vide dans le code, il faut mettre quoi à l'intérieur ?
Merci

toujours rien. C'est désespérant :(

Je viens de faire le test en prenant le premier code ('tls' + port 587)
j'ai eu d'abord une erreur d'authentification et dans le message, il est dit de se connecter à sa messagerie
là, un mail de google me dit qu'une connexion non sécurisée a été bloquée mais qu'on peut autoriser en débloquant les applications non sécurisées. (ce que je fais)
2 essai ... ça passe !!!
je reçois bien le mail en html avec les accents

Tu peux m'envoyer le screen shot afin que je voye la marche a suivre stp ?

Merci bcp :)

En tout cas moi j'ai simpelement ce bout de code là avec tsl à vide et en utilisant un compte gmail également et je n'ai vraiment aucun soucis :/ Donc je peux pas t'aider plus du coup, désolé.

Voici mon code
j'ai mis en commentaire le timezone (c'est peut être ça ???)

<?php
//SMTP needs accurate times, and the PHP time zone MUST be set
//This should be done in your php.ini, but this is how to do it if you don't have access to that
//date_default_timezone_set('Etc/UTC');

require "vendor/autoload.php";

//Create a new PHPMailer instance
$mail = new PHPMailer();

//Tell PHPMailer to use SMTP
$mail->isSMTP();

//Enable SMTP debugging
// 0 = off (for production use)
// 1 = client messages
// 2 = client and server messages
$mail->SMTPDebug = 2;

//Ask for HTML-friendly debug output
$mail->Debugoutput = 'html';

//Set the hostname of the mail server
$mail->Host = 'smtp.gmail.com';
// use
// $mail->Host = gethostbyname('smtp.gmail.com');
// if your network does not support SMTP over IPv6

//Set the SMTP port number - 587 for authenticated TLS, a.k.a. RFC4409 SMTP submission
$mail->Port = 587;

//Set the encryption system to use - ssl (deprecated) or tls
$mail->SMTPSecure = 'tls';

//Whether to use SMTP authentication
$mail->SMTPAuth = true;

//Username to use for SMTP authentication - use full email address for gmail
$mail->Username = "****@googlemail.com";

//Password to use for SMTP authentication
$mail->Password = "****";

//Set who the message is to be sent from
$mail->setFrom('****@googlemail.com', 'Huggy-G');

//Set an alternative reply-to address
$mail->addReplyTo('****@googlemail.com', 'Huggy-G');

//Set who the message is to be sent to
$mail->addAddress('****@free.fr', 'Huggy');

//Set the subject line
$mail->Subject = 'PHPMailer GMail SMTP test';

//Read an HTML message body from an external file, convert referenced images to embedded,
//convert HTML into a basic plain-text alternative body
//$mail->msgHTML(file_get_contents('contents.html'), dirname(FILE));
$mail->msgHTML('<h2>merci de vous être enregistré</h2>');

//Replace the plain text body with one created manually
$mail->AltBody = 'This is a plain-text message body';

//Attach an image file
//$mail->addAttachment('images/phpmailer_mini.png');

//send the message, check for errors
if (!$mail->send()) {
echo "Mailer Error: " . $mail->ErrorInfo;
} else {
echo "Message sent!";
}?>

Tu as un numéro ou je peux te joindre Huggy stp ?
Si oui voici mon mail : mica.aidan@gmail.com
merci beaucoup

Non désolé, je dois rester dispo pour mes clients, mais je garde un oeil sur le forum

Je comprends en tout cas j'ai fait comme tu as dit, j'ai autorisé les applications tierces et non sécurisées à croire que l'ordi ait une dent contre moi il ne veut pas envoyer ce mail. C'est un calvaire :(

Merci pour tout si vous avez d'autres idées et si vous entendez qu'un gars dans le Sud s'est pendu car il n' a pas réussi un pb informatique, vous savez de qui il s'"agit

si vous entendez qu'un gars dans le Sud s'est pendu car il n' a pas réussi un pb informatique, vous savez de qui il s'"agit

Il ne faut pas abuser non plus et c'est loin d'être correct de votre part de vouloir mettre la pression sur les autres en voulant les rendre responsable.

Lartak c'est de l'humour voyons :) Je sais bien que tout le monde fait son possible pour m'aider et je vous en suis très reconnaissant tous et toutes . Je fais aussi des pieds et des mains cote Apple, cote GMail aussi. J'ai appris récemment qu'il y avait une carte DAV inclue dans les MAC pour permettre certaines autorisations avec Gmail.
DAV cela parle a quelqu'un ?
merci bcp encore à tout le monde du temps que vous consacrez :)

Bonsoir, bon Apple Gmail se rendent la balle, apparemment Yosemite est un très mauvais système d'exploitation, je crois que je vais simplement réiniitaliser Postfix sur Yosemite, peut etre que ca améliorera les choses. QU'en pensez-vous ? Merci

J'ai réussi à recevoir les mails,youpi !!! :)
maintenant le pb c'est que je les reçois tous en retard :( autre paire de manche
pour ceux qui ont un pb j'ai réussi grâce a ce lien : http://blog.campodoro.org/?p=2318